[928uk] Parking brake & Pivot pin torque & Fuel tank cradle

Mark Nichols Mark.Nichols at eltek-semi.com
Tue Aug 30 09:40:16 UTC 2011


Hi All,

Finally been able to have some quality time with the 928 so hoping another year, another opportunity to get on the road!
Have refitted parking brake and adjusted per WSM. Appears to be working well, but with handbrake applied (both rear wheels off ground) I can rotate the wheels back and forward a couple degrees with a resounding 'clunk' as they stop in each direction. It seems as though the shoes are gripping the drum tightly, but there is some slack somewhere allowing the shoes to move a couple of mm in relation to the backplate. I have double checked and it looks like I have assembled as per the WSM. Any 'classic' error I have made or is this a normal characteristic? On the ground I would imagine it would equate to maybe a half inch of front/rear movement for the car.
Secondly, I am struggling to work out which torque figure to select from the WSM descriptions for the rear suspension lower pivot pins (the ones which tie together the lower hub, lower arm and lower shock absorber. I decided it was the one which was 106ftlbs, but not sure? On same note, there are 2 conical washers which I have fitted so the smaller end of the cones face each other and fit into the cone shaped recesses in the hub carrier casting. Is this correct? WSM pictures are not so clear and when I disassembled, one of the washers both 'pointed' towards the shock lower mount and presented the flat side of the washer to the recessed casting, which looked wrong (disassembly pic attached, hopefully).
Lastly, I bought a replacement SS tank cradle from Paul Anderson. Have refitted tank using this and find that even after taking 2 attempts and carefully joggling the tank to make sure it is well seated, that the SS strips look to be quite tight, particularly the one facing the rear and to your left when viwed from behind the car. There is a thin layer of adhesive foam, but that is squashed flat and it looks as though the edge of the strap is almost digging into the plastic. I understand it should be snug, but I am worried that with the weight of fuel, that the tank could get damaged. Anyone got any comments or long term experience using this cradle? I am thinking I might fit a washer or spacer on the side concerned where it bolts to the car to leave it snug, but not quite so tight?

Many thanks. Will probably have a few more re-assembly questions before long!

Mark N
90 GT


This message has been scanned by FORTIMAIL. We recommend you carry out further scans to ensure no malicious software has been attached to this mail during transit.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20110830/a11ffccc/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: washer1.JPG
Type: image/jpeg
Size: 32443 bytes
Desc: washer1.JPG
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20110830/a11ffccc/attachment.jpe>


More information about the 928uk mailing list