[928uk] Fog lights and hazard warning lights sticking.

[Mark Hallas]

Thanks Geoff. 

Do you need to remove the pod to get at the switches from behind?

Thanks,

Mark.


On 12 Feb 2012, at 17:02, geoff at symondsfamily.co.uk wrote:

> Hi Mark
> 
> Not unusual for the switches to be "gunked up" take them all out and clean the switches and the hole
> 
> Regards
> 
> Geoff
>   
> 
> On 12 February 2012 at 16:37 Mark Hallas <ringroad at ntlworld.com> wrote: 
> 
> > Does anyone know of a common reason for these switches to stick in when pushed. 
> > 
> > My car has basically been sat for 4 months outside and so there is a possibility that they are quite damp. 
> > 
> > Also need a bit of welding done, seems to have had the rear of the sills bodged with filler somewhat in the past. 
> > 
> > Otherwise not much needed but handbrake efficiency improving and the headlights setting, got the parts on order from Porsche so they can be permanently fixed in place. 
> > 
> > Also is there a guide anywhere for removing the rear seats, i'd like to get most of the interior out to clean it. 
> > 
> > Thanks, 
> > 
> > Mark. 
> > _______________________________________________ 
> > 928uk mailing list 
> > 928uk at lists.928.org.uk 
> > http://lists.928.org.uk/cgi-bin/mailman/listinfo/928uk

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20120212/54bed3f1/attachment.htm>