[928uk] Fog lights and hazard warning lights sticking.

[geoff at symondsfamily.co.uk]

No you can take them out from the front...... the switch knob pulls away
from the electrical connector.... you might have to put your hand up to
hold the electrical plug though!! a clean of the contacts with some
elecrical friendly spray might be a good

Geoff




On 12 February 2012 at 17:07 Mark Hallas <ringroad at ntlworld.com> wrote:

> Thanks Geoff.
>
> Do you need to remove the pod to get at the switches from behind?
>
> Thanks,
>
> Mark.
>
>
> On 12 Feb 2012, at 17:02, geoff at symondsfamily.co.uk wrote:
>
> > Hi Mark
> >
> > Not unusual for the switches to be "gunked up" take them all out and
clean the switches and the hole
> >
> > Regards
> >
> > Geoff
> > 
> >
> > On 12 February 2012 at 16:37 Mark Hallas <ringroad at ntlworld.com> wrote:
> >
> > > Does anyone know of a common reason for these switches to stick in
when pushed.
> > >
> > > My car has basically been sat for 4 months outside and so there is a
possibility that they are quite damp.
> > >
> > > Also need a bit of welding done, seems to have had the rear of the
sills bodged with filler somewhat in the past.
> > >
> > > Otherwise not much needed but handbrake efficiency improving and the
headlights setting, got the parts on order from Porsche so they can be
permanently fixed in place.
> > >
> > > Also is there a guide anywhere for removing the rear seats, i'd like
to get most of the interior out to clean it.
> > >
> > > Thanks,
> > >
> > > Mark.
> > > _______________________________________________
> > > 928uk mailing list
> > > 928uk at lists.928.org.uk
> > > http://lists.928.org.uk/cgi-bin/mailman/listinfo/928uk
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20120212/19e3a5bc/attachment.htm>