[928uk] Flexible Fuel Lines

[Brian Butterworth via 928uk]

Ben,I replaced the rubber sections of the engine bay fuel pipes over the summer.  I bought everything off eBay for £20 including tools.  I used 7.6mm ID fuel hose and double ear crimps.  The hose has a small minimum bend radius so is suitable for the hose between the two regulators.  If you have a Dremel type cutter the old sections are easy to remove. Just check and check again for leaks afterwards. 
Brian 88 S4 auto 
Sent from my Samsung device

-------- Original message --------
From: Ben Butcher via 928uk <928uk at lists.928.org.uk> 
Date: 28/10/2015  19:24  (GMT+00:00) 
To: 928 uk <928uk at lists.928.org.uk> 
Subject: [928uk] Flexible Fuel Lines 

I was just wondering what the groups opinion is on replacing the two high pressure flexible fuel lines that run down the side of the engine bay?

Should I replace mine as a precautionary measure as failure of either of them would probably result in the loss of the vehicle by fire.

Thanks for any opinions.

Ben Butcher
1984 S2 Manual
_______________________________________________
928uk mailing list
928uk at lists.928.org.uk
http://lists.928.org.uk/cgi-bin/mailman/listinfo/928uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20151029/15d37a17/attachment.htm>