[928uk] Centre comb flap

Paul R Smith smiffypr at gmail.com
Mon Jan 23 15:20:24 UTC 2017


 From a "service information" document:
"A microswitch connected with the center nozzle slider switch opens and 
closes the mixing flap of the center nozzle. When closed, this mixing 
flap has the task of mixing cooled or fresh air with heated air, in 
order to avoid great differences in air temperature coming out of the 
center vent."

So if it is permanently open you will possibly notice that the air from 
the top of the centre vent is cooler than the air from the bottom.

I'm not sure which way it will be with no vacuum, but it's not going  to 
make much difference either way.

Smiffy

On 23/01/2017 14:00, Martin Robins via 928uk wrote:
> Hi all, I have been out in the car today and the centre comb flap has
> started to click badly. At least I think it's that! It has been doing
> this occasionally. Think I might need to replace the diaphram
> sometime. As a short term measure, if I was to isolate the vacuum line
> from the manifold and plug the end what would be the consequences?
> Would it be open all the time or closed? What is its purpose?
> Thanks,
> Martin
> 89GT
>
> Sent from my iPad
> _______________________________________________
> 928uk mailing list
> 928uk at lists.928.org.uk
> https://lists.928.org.uk/mailman/listinfo/928uk
>

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




More information about the 928uk mailing list