[928uk] General Rubber Seals advice/supplier to try

Simonp simonp at f2s.com
Thu Jan 26 13:29:51 UTC 2017


Hi Joe,

Funny you mention this - I've used them for all the seals on my Etype, great quality and fit. They come highly recommended 😀

Thanks,

Simon.

> On 26 Jan 2017, at 12:55, Joe Field via 928uk <928uk at lists.928.org.uk> wrote:
> 
> For the sort of seals that the cars need in many paces (i.e. Sponge or rubber section with metal inserts to grip a lip)  there is a company in Tunbridge Wells that has a big selection viewable on the online catalogue. EPDM is the type of rubber most Automotive seals are made from.
> 
> Link to the catalogue below, seems like quite a few Jag seals in there (the owner used to race classic Jags)
> 
> No affiliation or idea what costs/min order volume is like but may be helpful if you are stuck
> 
> https://coh-baines.co.uk/pdfs/catalogue_compressed.pdf
> 
> Hope it's of some use.
> 
> Joe 91GT
> 
> 
> -----Original Message-----
> From: 928uk [mailto:928uk-bounces at lists.928.org.uk] On Behalf Of Ian Marsh via 928uk
> Sent: 26 January 2017 12:39
> To: 'Simon Crowe' <simon.crowe at e-crowe.com>
> Cc: 928uk at lists.928.org.uk
> Subject: Re: [928uk] Tailgate Gas Struts
> 
> Simon,
> 
> Many thanks, I have found OPC at Bristol very good and I can collect so no delivery and as you say 10% for TIPEC members
> 
> Regards
> 
> Ian
> 
> -----Original Message-----
> From: Simon Crowe [mailto:simon.crowe at e-crowe.com] 
> Sent: 26 January 2017 12:23
> To: Ian Marsh
> Cc: Darren Norman; mark lovett; 928uk at lists.928.org.uk
> Subject: Re: [928uk] Tailgate Gas Struts
> 
> Hi Ian,
> 
> I got mine from Rosepassion, not sure which way the wind is blowing on exchange rates today but it was around £100 delivered . Probably worth a call to a local opc and see what they quote, less the 10% discount they give to PCGB and tipec members (I have never been asked for a membership number.
> 
> The seal also has an extended lip to hold trim in place, the ends are sealed off and it has the joining piece.
> 
> Hope that helps 
> Simon.
> 
> 
> 
>> On 26 Jan 2017, at 12:11, Ian Marsh <ian.marsh at ijmprojects.co.uk> wrote:
>> 
>> Simon,
>> 
>> My seal is in the same condition, I have managed to glue the split next to lock with some silicone mastic as a temporary measure.
>> 
>> How much was the full price for the Porsche seal, do I need to sit down?
>> 
>> Regards
>> 
>> Ian
>> 
>> -----Original Message-----
>> From: Simon Crowe [mailto:simon.crowe at e-crowe.com] 
>> Sent: 26 January 2017 11:54
>> To: Darren Norman
>> Cc: Ian Marsh; mark lovett; 928uk at lists.928.org.uk
>> Subject: Re: [928uk] Tailgate Gas Struts
>> 
>> Regarding the boot seal, I'd recommend the Porsche part.
>> 
>> I bought a replacement seal for my S4 from a well known uk supplier, and although it fitted ok it has developed some splits in it over approx 5 years. I assume the splits are simply from the constant compression on the seal.
>> 
>> I have just replaced my original GTS seal with the genuine article, but the original seal only has one split in it down by the lock, even though it's 22 years old.
>> 
>> 
>> 
>>> On 26 Jan 2017, at 11:08, Darren Norman <darren.norman2 at ntlworld.com> wrote:
>>> 
>>> Hi Ian/Mark
>>> 
>>> That’s great timing, as I'm also in need of both front and back gas struts.
>>> 
>>> I agree it's great to support a UK manufacturer. 
>>> 
>>> I'll be placing an order shortly!
>>> 
>>> 
>>> Darren
>>> 
>>> 91 S4
>>> 
>>> -----Original Message-----
>>> From: 928uk [mailto:928uk-bounces at lists.928.org.uk] On Behalf Of Ian Marsh via 928uk
>>> Sent: 26 January 2017 10:46
>>> To: 'mark lovett'; 928uk at lists.928.org.uk
>>> Subject: Re: [928uk] Tailgate Gas Struts
>>> 
>>> Mark,
>>> 
>>> I bought my gas struts from SGS Engineering solutions in Derby 01332 576850 they have a good website http://www.sgs-engineering.com/
>>> 
>>> £12.99 each with a 2 year warranty.
>>> 
>>> Boot seal; mine is poor but OK for now I have seen them on ebay about £40, not sure of quality?
>>> 
>>> Hope this helps
>>> 
>>> Regards
>>> 
>>> Ian
>>> 
>>> 1990 S4 Auto
>>> 
>>> -----Original Message-----
>>> From: mark lovett [mailto:marklovett66 at gmail.com]
>>> Sent: 26 January 2017 10:13
>>> To: 928uk at lists.928.org.uk
>>> Subject: Tailgate Gas Struts
>>> 
>>> Hi All
>>> 
>>> I am now fed up with the tailgate catching me out and coming down on my head!. This seems to be worse in the winter, which I know is common with gas struts generally. Warmer conditions not an issue.
>>> 
>>> Has any one found a good brand they could recommend, or do I head down to OPC?.
>>> 
>>> Also after washing the car I noticed water drips on the rear sun visors. I am thinking this could be the tail gate seal, that has over time worn/failed. Has anyone got any thoughts. 
>>> 
>>> 
>>> Cheers
>>> 
>>> Mark 89S4
>>> 
>>> 
>>> 
>>> 
>>> 
>>> This email has been scanned by BullGuard antivirus protection.
>>> For more info visit www.bullguard.com
>>> 
>>> 
>>> _______________________________________________
>>> 928uk mailing list
>>> 928uk at lists.928.org.uk
>>> https://lists.928.org.uk/mailman/listinfo/928uk
>>> 
>> 
>> 
>> This email has been scanned by BullGuard antivirus protection.
>> For more info visit www.bullguard.com
>> 
>> 
> 
> 
> This email has been scanned by BullGuard antivirus protection.
> For more info visit www.bullguard.com
> 
> 
> _______________________________________________
> 928uk mailing list
> 928uk at lists.928.org.uk
> https://lists.928.org.uk/mailman/listinfo/928uk
> _______________________________________________
> 928uk mailing list
> 928uk at lists.928.org.uk
> https://lists.928.org.uk/mailman/listinfo/928uk




More information about the 928uk mailing list