[928uk] PS Low Pressure Hose

[Paul]

Thanks Adrian

The leak is next to the rack where the crimped solid line meets the hose

So, one possibility might be to cut it off where it's leaking and have a
new fitting made with a barbed connector and just clamp it?

Any chance that might work - for now at least?

Paul


On 12 September 2018 at 22:41, Adrian Langford <
adrian.langford at qualitative.co.uk> wrote:

> Your car shows great timing Paul — that Vmax session in Germany may have
> shaken things up…
>
> All depends where the leak is on the return hose. The routing is awkward
> as there is cooling loop in front of radiator, so I think Radiator must
> come out if leak is in metal section.
>
> If leak is in rubber section running to reservoir it’s easy. You just
> Dremel off crimp where metal section joins rubber where it exits side of
> engine bay, and replace with new rubber section. It’s low pressure so
> needn’t be special hydraulic hose. But it’s moulded and slightly different
> IDs at each end, so to get a good fit at metal and reservoir nipple the
> most elegant solution is to buy a new supply hose, and cut off one end.
> Leaves you with moulded right angle piece with exactly right IDs. Thick
> hose clamp is good for connecting to metal section.
>
> Adrian
>
> On 12 Sep 2018, at 22:30, Paul via 928uk <928uk at lists.928.org.uk> wrote:
>
>
> *From: *Paul <ukkid35 at gmail.com>
> *Subject: **PS Low Pressure Hose*
> *Date: *12 September 2018 at 22:30:24 BST
> *To: *928 List <928uk at lists.928.org.uk>
>
>
> Hi
>
> So not fair!
>
> Now I've had the rack seals replaced, the return hose has sprung a leak
>
> I can't remember the routing, or what I need to remove to take it off the
> car
>
> I did replace the high pressure hose with a Pirtek equivalent some years
> ago, but my memory has faded, other than remembering that it wasn't
> straightforward
>
> Any advice on removing the hose very welcome
>
> Paul
> 87 S4 Manaul RHD
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20180912/ebd5c897/attachment.htm>