[928uk] PS Low Pressure Hose

[Paul]

Unfortunately I will lose about an inch of hose which means it will not
reach, so I have been sold a double ended barbed connector and some hose

I was told that the crimped sleeve offers less pressure resistance than a
normal hose clip so should be cut off and discarded as you described

Ideally I'll be able to reach the other end of the hose and replace the
entire length, but from memory it is hidden by the cross-member

Paul

On 13 September 2018 at 09:06, Paul R Smith via 928uk <
928uk at lists.928.org.uk> wrote:

>
>
> ---------- Forwarded message ----------
> From: Paul R Smith <smiffypr at gmail.com>
> To: 928uk at lists.928.org.uk
> Cc:
> Bcc:
> Date: Thu, 13 Sep 2018 09:06:01 +0100
> Subject: Re: [928uk] PS Low Pressure Hose
> Just hacksaw/dremel the crimped sleeve off and you will have your barbed
> connector.
>
> Smiffy
>
> On 13/09/2018 08:14, Paul via 928uk wrote:
>
>> Subject:
>> Re: [928uk] PS Low Pressure Hose
>> From:
>> Paul <ukkid35 at gmail.com>
>> Date:
>> 13/09/2018 08:14
>>
>> To:
>> Adrian Langford <adrian.langford at qualitative.co.uk>
>> CC:
>> 928 List <928uk at lists.928.org.uk>
>>
>>
>>
>> Here is the end of the return hose where it attaches to the rack
>>
>> https://thumbsnap.com/i/ILzlUaZD.jpg
>>
>> I have cut the hose at the point where it was leaking
>>
>> I'm going to take it to Pirtek shortly to see if they can make up a
>> replacement with a barbed connector
>>
>> Wish me luck!
>>
>> Paul
>> 87 S4 Manual RHD
>>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20180913/6ae6df64/attachment.htm>