[928uk] PS Low Pressure Hose

[Paul]

Thankfully it is possible to see both ends of the 6" hose

So I've been able to remove the old hose and make up a new one

I had to tie back the starter cables in order to get a dremel in safely

New hose is now fitted, but not pressure tested yet

https://thumbsnap.com/i/dsdGg6jt.jpg

https://thumbsnap.com/i/14D8VvGb.jpg

https://thumbsnap.com/i/2rFVfIY1.jpg

So much happier now than I was at 11pm last night!

Paul
87 S4 Manual


On 13 September 2018 at 10:24, Paul via 928uk <928uk at lists.928.org.uk>
wrote:

>
>
> ---------- Forwarded message ----------
> From: Paul <ukkid35 at gmail.com>
> To: Paul R Smith <smiffypr at gmail.com>
> Cc: 928 List <928uk at lists.928.org.uk>
> Bcc:
> Date: Thu, 13 Sep 2018 10:24:15 +0100
> Subject: Re: [928uk] PS Low Pressure Hose
>
> Unfortunately I will lose about an inch of hose which means it will not
> reach, so I have been sold a double ended barbed connector and some hose
>
> I was told that the crimped sleeve offers less pressure resistance than a
> normal hose clip so should be cut off and discarded as you described
>
> Ideally I'll be able to reach the other end of the hose and replace the
> entire length, but from memory it is hidden by the cross-member
>
> Paul
>
> On 13 September 2018 at 09:06, Paul R Smith via 928uk <
> 928uk at lists.928.org.uk> wrote:
>
>>
>>
>> ---------- Forwarded message ----------
>> From: Paul R Smith <smiffypr at gmail.com>
>> To: 928uk at lists.928.org.uk
>> Cc:
>> Bcc:
>> Date: Thu, 13 Sep 2018 09:06:01 +0100
>> Subject: Re: [928uk] PS Low Pressure Hose
>> Just hacksaw/dremel the crimped sleeve off and you will have your barbed
>> connector.
>>
>> Smiffy
>>
>> On 13/09/2018 08:14, Paul via 928uk wrote:
>>
>>> Subject:
>>> Re: [928uk] PS Low Pressure Hose
>>> From:
>>> Paul <ukkid35 at gmail.com>
>>> Date:
>>> 13/09/2018 08:14
>>>
>>> To:
>>> Adrian Langford <adrian.langford at qualitative.co.uk>
>>> CC:
>>> 928 List <928uk at lists.928.org.uk>
>>>
>>>
>>>
>>> Here is the end of the return hose where it attaches to the rack
>>>
>>> https://thumbsnap.com/i/ILzlUaZD.jpg
>>>
>>> I have cut the hose at the point where it was leaking
>>>
>>> I'm going to take it to Pirtek shortly to see if they can make up a
>>> replacement with a barbed connector
>>>
>>> Wish me luck!
>>>
>>> Paul
>>> 87 S4 Manual RHD
>>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20180913/eff7f7f8/attachment.htm>