[928uk] Steering Rack Bushes

[Alexander Popov]

Yes - I have done it an all four 928s that have been through my hands. It is a 30yrs old part which sits very close to the exhaust headers. It is a heavy duty part, which is normally fitted to VW Vans, but any rubber will deteriorate in this environment. The rubber donut is not available separately from Porsche, but you can buy the VW part and re-fit the Porsche bronze bushes. £10 instead of the £450 that Porsche wants for the steering column with the rubber bush attached to the end of it. 

Hope this helps,

Alex


Sent from my iPhone

> On 20 Jun 2019, at 07:43, Paul <ukkid35 at gmail.com> wrote:
> 
> My Cerbera's rack is mounted directly to the chassis, and there is plenty of vibration and 'shock' transmission
> 
> That is not what I wanted in the 928, however the 928 has a rubber isolator in the steering column
> 
> I had to replace the isolator in a Capri I owned many years ago because it became very soft indeed
> 
> Has anyone had to replace the 928 isolator?
> 
> Paul
> 87 S4 Manual
> 
>> On Wed, 19 Jun 2019 at 23:35, Ivan G <ijgleaves at gmail.com> wrote:
>> Just to add, I fitted the Delrin bushes 6yrs ago, I got them from Roger, I've done 22k miles on them since.
>> I never noticed any difference in vibration through the steering wheel, turn in was definitely better.
>> 
>> Ivan 88 S4.
>> 
>>> On Wed, Jun 19, 2019 at 11:51 AM Paul via 928uk <928uk at lists.928.org.uk> wrote:
>>> 
>>> I've always been very wary of replacing any rubber parts with solid versions
>>> 
>>> However, I fitted Delrin recently and had actually forgotten all about them until I read your thread
>>> 
>>> This suggests that there's no noticeable increase in vibration, but I've only done one return journey of 250 miles so far
>>> 
>>> Paul
>>> 87 S4 Manual
>>> 
>>>> On Wed, 19 Jun 2019 at 17:28, Alexander Popov via 928uk <928uk at lists.928.org.uk> wrote:
>>>> Aluminium bushes here in both my GTS and my GTS race car. No noticeable increase in vibration. Steering precision was increased indeed. I also run much more aggressive geometry though, so that would have definitely helped. Had them made by a machinist in BG - think the two sets were £40 all in. 
>>>> 
>>>> Alex
>>>> 
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>> > On 18 Jun 2019, at 21:19, peter watts via 928uk <928uk at lists.928.org.uk> wrote:
>>>> > 
>>>> > <mime-attachment>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20190620/911d9973/attachment.htm>