[928uk] Reverse lights
Paul R Smith
smiffypr at gmail.com
Sat Oct 12 17:33:29 UTC 2019
That "connector" looks like one of the push buttons, trip reset or
intensive wash. The insides and button are gone.
Blue and blue/black wires connecting to two brown wires are the wires to
the reversing lamp switch.
Smiffy
On 12/10/2019 15:19, Shane Beardsley wrote:
> Thank you all!
>
> I’m just in the middle of checking the various points, and it has raised
> a couple of questions!
>
> Firstly whilst looking under the pod, I found a loose connector that
> looks broken with two wires attached! Clearly it was supposed be in the
> metal hole you can see; what is that??
>
> Also second picture; I am looking at wires in spare wheel well now, and
> I recall someone mentioning a blue and blue/black wire. Is this one of
> the connectors I should check?
>
> Image
>
> Image
>
> Cheers
> Shane
>
> Sent from my iPhone.
> ------------------------------------------------------------------------
> *From:* Paul Smith <smiffypr at gmail.com>
> *Sent:* Saturday, October 12, 2019 12:29:29 PM
> *To:* Shane Beardsley <shanebeardsley at hotmail.com>
> *Cc:* Adrian Langford <adrian.langford at qualitative.co.uk>; Ian Salisbury
> <ian at salisburyassociates.co.uk>; 928 List <928uk at lists.928.org.uk>
> *Subject:* Re: [928uk] Reverse lights
> I would check for power to the switch,then if that's there, bridge the
> connector for the switch and see if they light.
> Reversing switches do fail (in general, because of the environment
> they're in) but they are not a known weak point on the 928.
> Smiffy
>
> On Sat, 12 Oct 2019 at 10:08, Shane Beardsley via 928uk
> <928uk at lists.928.org.uk <mailto:928uk at lists.928.org.uk>> wrote:
>
> Morning all!
>
> The reverse light on my ‘84 S2 Manual is one of the only things that
> hasn’t worked since I got it, and this post has got me fired up to
> try and fix it! :-)
>
> Does anyone know any of the most likely culprits that I should check
> (don’t say bulb!) or points that are known to fail?
>
> Cheers,
> Shane
>
> Sent from my iPhone.
> ------------------------------------------------------------------------
> *From:* 928uk <928uk-bounces at lists.928.org.uk
> <mailto:928uk-bounces at lists.928.org.uk>> on behalf of Adrian
> Langford via 928uk <928uk at lists.928.org.uk
> <mailto:928uk at lists.928.org.uk>>
> *Sent:* Saturday, October 12, 2019 9:57:07 AM
> *To:* Ian Salisbury <ian at salisburyassociates.co.uk
> <mailto:ian at salisburyassociates.co.uk>>
> *Cc:* 928 List <928uk at lists.928.org.uk <mailto:928uk at lists.928.org.uk>>
> *Subject:* Re: [928uk] Reverse lights
> Next to selector cable I believe. But from there runs to 2 pin
> connector in spare tyre we’ll, so check for issue there too.
>
> Adrian
>
> > On 12 Oct 2019, at 09:51, Ian Salisbury via 928uk <928uk at lists.928.org.uk <mailto:928uk at lists.928.org.uk>> wrote:
> >
> > Still have no reverse lights - where is the connection on the gearbox? Manual 87 S4.
> >
> > Ian Salisbury
> > 07748750084
>
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the 928uk
mailing list