[928uk] oil level boot

[Richard Armstrong]

https://www.djetparts.com/product-page/d-jetronic-2-pole-angle-boot?lang=en

On 09-Nov-20 3:38 PM, jonathan at netvue.co.uk wrote:
> Sorry Richard, you've lost me. Go direct where? Where are they selling 2 for £9?
>
> Jonathan
>
>
> -----Original Message-----
> From: Richard Armstrong <richard at ritech-systems.com>
> Sent: 08 November 2020 09:55
> To: jonathan at rackowe.net; 'Paul Smith' <smiffypr at gmail.com>
> Cc: 928UK List <928uk at lists.928.org.uk>
> Subject: Re: [928uk] oil level boot
>
> Or you could go direct - I just bought 2 for £9. thanks to  Smiffy
> Richard
>
> On 08-Nov-20 12:50 AM, jonathan at netvue.co.uk wrote:
>> I'm going to order some of these sump oil level sender boots from Germany:
>> https://www.djetparts.com/product-page/d-jetronic-2-pole-angle-boot?lang=en
>>
>> Anyone else want one? - they'll be about a tenner each, including UK postage, depending how many people commit to purchase.
>>
>> Jonathan
>>
>>
>> -----Original Message-----
>> From: 928uk <928uk-bounces at lists.928.org.uk> On Behalf Of Richard Armstrong via 928uk
>> Sent: 22 October 2020 09:15
>> To: Paul Smith <smiffypr at gmail.com>
>> Cc: 928uk at lists.928.org.uk
>> Subject: Re: [928uk] oil level boot
>>
>> Useful. Thanks. They always get crispy with the heat
>> Richard
>>
>>
>> On 21-Oct-20 3:06 PM, Paul Smith wrote:
>>> The one you want has tabs to aid removal. It has a bosch part number
>>> on it 1 280 703 007. There's a good picture here:
>>> https://rennlist.com/forums/928-forum/968578-oil-level-switch-connector-boot.html
>>> <https://rennlist.com/forums/928-forum/968578-oil-level-switch-connector-boot.html>
>>>
>>> The alternative part mentioned on rennlist is available here:
>>> https://reproparts.wazala.com/products/d-jetronic-2-pole-angle-boot-4479000/
>>> <https://reproparts.wazala.com/products/d-jetronic-2-pole-angle-boot-4479000/>
>>> for 12.89 euro inc shipping
>>>
>>> I have one here that is still flexible but was cable-tied to the
>>> harness (not connected) so is deformed, I've put it in hot water to
>>> see if it resumes its shape.
>>>
>>> Smiffy
>>> On Wed, 21 Oct 2020 at 13:41, Richard Armstrong via 928uk
>>> <928uk at lists.928.org.uk <mailto:928uk at lists.928.org.uk>> wrote:
>>>
>>>       There does not seem to be a number for the oil level sensor connector
>>>       boot in the top of the sump pan? Unless it is the same as the AC temp
>>>       sender connector boot (928 612 497 00)
>>>       These always break up when the sump is removed and as far as I can
>>>       see
>>>       Roger Tyson is the only supplier? I need one sooner if poss
>>>
>>>       Regrds
>>>       Richard
>>>       --
>>>
>>>       --
>>>       This email has been checked for viruses by AVG.
>>>       https://www.avg.com <https://www.avg.com>
>>>

-- 

-- 
This email has been checked for viruses by AVG.
https://www.avg.com