[928uk] oil level boot

[Richard Armstrong]

Ah, sorry Jonathan.
I just needed them! Didn't look at the shipping. I would be happy to 
stock a couple more
Richard

On 09-Nov-20 5:34 PM, jonathan at netvue.co.uk wrote:
> Richard, that's exactly the same link and the same price as the link I sent originally!!
>
> It costs €16.90 to get 2 from there delivered to the UK, which is £15, not £9.
>
> A single one would cost £12 delivered to UK, which is why I was suggesting a group buy, and then distributed in the UK: final price under a tenner each.
>
> Never mind, I'm starting to realise that there are only a handful of people on this list that actually work on their cars themselves, so probably not enough interest anyway.
>
> Jonathan
>
>
>
> -----Original Message-----
> From: Richard Armstrong <richard at ritech-systems.com>
> Sent: 09 November 2020 16:26
> To: jonathan at rackowe.net; 'Paul Smith' <smiffypr at gmail.com>
> Cc: '928UK List' <928uk at lists.928.org.uk>
> Subject: Re: [928uk] oil level boot
>
> https://www.djetparts.com/product-page/d-jetronic-2-pole-angle-boot?lang=en
>
> On 09-Nov-20 3:38 PM, jonathan at netvue.co.uk wrote:
>> Sorry Richard, you've lost me. Go direct where? Where are they selling 2 for £9?
>>
>> Jonathan
>>
>>
>> -----Original Message-----
>> From: Richard Armstrong <richard at ritech-systems.com>
>> Sent: 08 November 2020 09:55
>> To: jonathan at rackowe.net; 'Paul Smith' <smiffypr at gmail.com>
>> Cc: 928UK List <928uk at lists.928.org.uk>
>> Subject: Re: [928uk] oil level boot
>>
>> Or you could go direct - I just bought 2 for £9. thanks to  Smiffy
>> Richard
>>
>> On 08-Nov-20 12:50 AM, jonathan at netvue.co.uk wrote:
>>> I'm going to order some of these sump oil level sender boots from Germany:
>>> https://www.djetparts.com/product-page/d-jetronic-2-pole-angle-boot?lang=en
>>>
>>> Anyone else want one? - they'll be about a tenner each, including UK postage, depending how many people commit to purchase.
>>>
>>> Jonathan
>>>
>>>
>>> -----Original Message-----
>>> From: 928uk <928uk-bounces at lists.928.org.uk> On Behalf Of Richard Armstrong via 928uk
>>> Sent: 22 October 2020 09:15
>>> To: Paul Smith <smiffypr at gmail.com>
>>> Cc: 928uk at lists.928.org.uk
>>> Subject: Re: [928uk] oil level boot
>>>
>>> Useful. Thanks. They always get crispy with the heat
>>> Richard
>>>
>>>
>>> On 21-Oct-20 3:06 PM, Paul Smith wrote:
>>>> The one you want has tabs to aid removal. It has a bosch part number
>>>> on it 1 280 703 007. There's a good picture here:
>>>> https://rennlist.com/forums/928-forum/968578-oil-level-switch-connector-boot.html
>>>> <https://rennlist.com/forums/928-forum/968578-oil-level-switch-connector-boot.html>
>>>>
>>>> The alternative part mentioned on rennlist is available here:
>>>> https://reproparts.wazala.com/products/d-jetronic-2-pole-angle-boot-4479000/
>>>> <https://reproparts.wazala.com/products/d-jetronic-2-pole-angle-boot-4479000/>
>>>> for 12.89 euro inc shipping
>>>>
>>>> I have one here that is still flexible but was cable-tied to the
>>>> harness (not connected) so is deformed, I've put it in hot water to
>>>> see if it resumes its shape.
>>>>
>>>> Smiffy
>>>> On Wed, 21 Oct 2020 at 13:41, Richard Armstrong via 928uk
>>>> <928uk at lists.928.org.uk <mailto:928uk at lists.928.org.uk>> wrote:
>>>>
>>>>        There does not seem to be a number for the oil level sensor connector
>>>>        boot in the top of the sump pan? Unless it is the same as the AC temp
>>>>        sender connector boot (928 612 497 00)
>>>>        These always break up when the sump is removed and as far as I can
>>>>        see
>>>>        Roger Tyson is the only supplier? I need one sooner if poss
>>>>
>>>>        Regrds
>>>>        Richard
>>>>        --
>>>>
>>>>        --
>>>>        This email has been checked for viruses by AVG.
>>>>        https://www.avg.com <https://www.avg.com>
>>>>

-- 

-- 
This email has been checked for viruses by AVG.
https://www.avg.com