[928uk] Swich Illumination Bulb

[douglasblack5 at aol.com]

Don't know who it was, but bulb has been pushed right in and only dome showing, not enough to get tubing on it. Back to super glue and cotton bud stem  and let it harden !

Cheers


-----Original Message-----
From: jonathan at netvue.co.uk
To: 'Adrian Langford' <adrian.langford at qualitative.co.uk>; douglasblack5 at aol.com
CC: 928UK List <928uk at lists.928.org.uk>
Sent: Sun, 22 Nov 2020 18:10
Subject: RE: [928uk] Swich Illumination Bulb

Adrian’s way is the technique used by engineers on equipment switch bulbs all over the world. For a tricky bulb you need just the right bit of grippy tubing, so that the more you pull on the tubing the more it stretches and shrinks onto the bulb, gripping it harder as you pull harder until eventually out pops the bulb 😊  Feel free to put releasing fluid in there to help, and leave it a while to do its job, but keep the fluid off the bulb glass so that the tubing can grip.  Jonathan    From: 928uk <928uk-bounces at lists.928.org.uk> On Behalf Of Adrian Langford via 928uk
Sent: 22 November 2020 14:48
To: douglasblack5 at aol.com
Cc: 928 List <928uk at lists.928.org.uk>
Subject: Re: [928uk] Swich Illumination Bulb  I remove them by pushing piece of plastic or rubber tubing onto the bulb, then it pulls out without risk of damage.  Adrian

On 22 Nov 2020, at 14:44, DOUGLAS BLACK via 928uk <928uk at lists.928.org.uk> wrote:    From: douglasblack5 at aol.comSubject: Swich Illumination BulbDate: 22 November 2020 at 14:44:32 GMTTo: "928uk at lists.928.org.uk" <928uk at lists.928.org.uk>Reply-To: douglasblack5 at aol.com

Hi, does this pesky little bugger come out ??  Have  very poor illumination on rear fog switch.

Cheers
Dougie