[928uk] Still no start.

[Mark Breton]

Hi Martin

I had a similar issue when I had only worked on the steering rack but went
to start it and no go.

Heres my procedure -

Checked the fuel pump - it would run from a separate 12v supply but no
engine start also checked for 12 v at the pump from the car - none.

Checked for spark when cranking the engine - none

I then decided that the common denominator was the crank position sensor -
I do not have the in depth knowledge of many listers but
in fact that was the case.
Awkward to get at and extract ( in many bits ) but has run ok since , cost
about £30.

Good luck

Mark

On Sun, 22 Nov 2020 at 14:10, MARTIN PRUCE via 928uk <928uk at lists.928.org.uk>
wrote:

> Afternoon all.
>
>
>
> Well, I think I have had it now....
>
>
>
> This carries on from my previous posts of not starting in cold weather.
>
> Just finished an intake re-fresh with all new gaskets, connectors,
> injector seals and a new idle stab. Valve. And guess what...Still won`t
> start..
>
> I have carried out the suggestions from you kind folks that gave me advice
> in trying to resolve the issue but with my lack of knowledge and skill, I
> feel i have done all I can.
>
> I cannot afford the expense of shipping it to a specialist, if I could
> even find someone that would work on it , so one option maybe just part it
> out instead?
>
>
>
> Sorry for the rant...
>
>
>
> Kind regards.
>
> Martin
>
> MY87S4 auto.
>
>
>
>
>
> .
>
>
>
> I think I have done all I can with
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>


-- 
Regards
Mark Breton
+44(0)7767577445
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.928.org.uk/pipermail/928uk/attachments/20201123/0f7bac96/attachment.htm>