[928uk] Rubber CV boot

[Marek Zawadzki]

Hi Guys,

Thanks a lot for your advices.
I will go for the set from Phil's link.

I have watched a video from US owner. It looks straightforward but there
was few questions that Peter and Simon already explained.

The only thing I don't know is the tool for metal clips. Do you think this
will work?

https://www.ebay.co.uk/itm/401527548927

Best Regards
Marek

On Tue, 11 Jun 2024, 21:36 peter watts via 928uk, <928uk at lists.928.org.uk>
wrote:

> Smiffy ,
> I can understand that - maybe I've been lucky, or big bench , big vice and
> large hammer with brass bar to hit to protect end of shaft has worked so
> far - once circlip removed
>
> Peter in Yorkshire
> 928 S2
> 928 SE
>
> On Tue, Jun 11, 2024 at 9:26 PM Paul R Smith <smiffypr at gmail.com> wrote:
>
> > I have had one joint iner that didn't want to come off the shaft, that's
> > the one issue you would avoid using the pullover ones.
> >
> > Smiffy
> >
> > On 11/06/2024 21:18, peter watts wrote:
> >
> > Smiffy ,
> >
> > from my experience having taken the driveshaft off - needed to fit
> stretch
> > boots ,or real boots  the actual time to disassemble the inner end joint
> > and fit t "proper boots" is really not that long, either way the
> > grease needs to be removed cleaned and refilled if the old boot has split
> > and allowed ingress of foreign material
> > and i feel that pulling stretch boots over the inner , or outer joint is
> > more likely to drag contamination into the joint
> >
> > just my 2p worth
> >
> >
> >
> > Peter
> > 928 S2
> > 928 SE
> >
> > On Tue, Jun 11, 2024 at 9:03 PM Paul R Smith via 928uk <
> > 928uk at lists.928.org.uk> wrote:
> >
> >> Has anyone tried the stretch boots yet? I would be tempted to give them
> >> a try.
> >>
> >> Also, notes for doing it if you are a first timer.
> >> If dirt has got into the boot, you will need to clean the joints out.
> >> When you refill with grease, the grease goes in the joint, not the boot.
> >>
> >> Smiffy
> >>
> >> On 11/06/2024 20:10, Marek Zawadzki via 928uk wrote:
> >> > Hi Guys,
> >> >
> >> > I just discovered that my car rear drive shaft CV boots / gaiters ( I
> >> not
> >> > sure how they are called) the rubber covers that holding grease are
> >> perish
> >> > and need replacing.
> >> >
> >> > Actually all 4 gone. Any advice where to buy them? I don't need
> genuine
> >> > ones.
> >> >
> >> > Best Regards
> >> > Marek
> >> > 928 S2 1986 auto
> >>
> >
> >
>