[928uk] had or needs engine mounts ?

[Andy Denton]

He's supplying the Volvo ones. I've got them on my car. With regards to checking if they need doing, place a long straight edge on top of the intake plenum and strut brace. The edge should clear the strut brace by at least 5mm


Cheers,



Andy 




---- On Sun, 16 Jun 2024 12:52:34 +0100 928uk at lists.928.org.uk wrote ----


Out of interest...what mounts is Roger supplying now.

Smiffy

On 16/06/2024 11:36, phil rick via 928uk wrote:

most will know that original engine mountings collapse over time.
have just fitted some of Rogers excellent versions to my S4, but a quick
and easy check to see if yours need replacing or a seller says they have
been fitted and you want to check they have.
measure from the top of the P/S fuel rail cover to the bottom of the strut
brace as pictured below
https://photobucket.com/u/phil928/a/b5ff2e9c-3a29-4cd6-9750-028f505097cc
picture shows with the new mountings, should be around 25mm
original sunk engine mounts measured 40mm at the same place.
i know the cross brace can bend slightly over time but i guess most will
have bent at the same rate as mine.
cheers
Phil