[928uk] had or needs engine mounts ?

[leaoalexandre at sapo.pt]

Hello, 

I have a set that I bought from Roger, two years ago - I bought them  
by mistake (I really wanted gearbox mounts...) and they have been  
sitting here in my garage.

They are new and I'm asking the exact same price I paid for them 150  
usd + shipping.

I'm in Portugal

Let me know if your interested.

Thank you

Best regards,

Alex

----- Mensagem de David Adler via 928uk <928uk at lists.928.org.uk> ---------

  Data: Sun, 16 Jun 2024 13:33:58 +0000

  De: David Adler via 928uk <928uk at lists.928.org.uk>

  Assunto: Re: [928uk] had or needs engine mounts ?

  Para: smiffypr at gmail.com, Andy Denton <andy at romar.co.uk>

  Cc: 928uk at lists.928.org.uk

> Hi
>
>
>
>  Llewellyn Guildford on this forum did a very good guide on Youtube  
> which made me realise my engine mounts were in need of replacement.  
> I used the Volvo ones and also found this video very helpful:
>
>
>
>  Into the fold: Advanced layouts | Wix Studio  
> (youtube.com)<https://www.youtube.com/watch?v=tUSXuJxJp5E&t=865s>
>
>
>
>  Regards
>
>  David
>
>  ________________________________
>
>  From: 928uk <928uk-bounces at lists.928.org.uk> on behalf of Andy  
> Denton via 928uk <928uk at lists.928.org.uk>
>
>  Sent: 16 June 2024 12:08
>
>  To: smiffypr at gmail.com <smiffypr at gmail.com>
>
>  Cc: 928uk at lists.928.org.uk <928uk at lists.928.org.uk>
>
>  Subject: Re: [928uk] had or needs engine mounts ?
>
>
>
>  He's supplying the Volvo ones. I've got them on my car. With  
> regards to checking if they need doing, place a long straight edge  
> on top of the intake plenum and strut brace. The edge should clear  
> the strut brace by at least 5mm
>
>
>
>
>
>  Cheers,
>
>
>
>
>
>
>
>  Andy
>
>
>
>
>
>
>
>
>
>  ---- On Sun, 16 Jun 2024 12:52:34 +0100 928uk at lists.928.org.uk wrote ----
>
>
>
>
>
>  Out of interest...what mounts is Roger supplying now.
>
>
>
>  Smiffy
>
>
>
>  On 16/06/2024 11:36, phil rick via 928uk wrote:
>
>
>
>  most will know that original engine mountings collapse over time.
>
>  have just fitted some of Rogers excellent versions to my S4, but a quick
>
>  and easy check to see if yours need replacing or a seller says they have
>
>  been fitted and you want to check they have.
>
>  measure from the top of the P/S fuel rail cover to the bottom of the strut
>
>  brace as pictured below
>
>   
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fphotobucket.com%2Fu%2Fphil928%2Fa%2Fb5ff2e9c-3a29-4cd6-9750-028f505097cc&data=05%7C02%7C%7Ca5ca7221f6af4e09d25808dc8dfd16eb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638541365350205441%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=FsjtLtHFlqtV7qYRv54Lnrk5g5Yi3OqRS3FueFgXhvE%3D&reserved=0<https://photobucket.com/u/phil928/a/b5ff2e9c-3a29-4cd6-9750-028f505097cc>
>
>  picture shows with the new mountings, should be around 25mm
>
>  original sunk engine mounts measured 40mm at the same place.
>
>  i know the cross brace can bend slightly over time but i guess most will
>
>  have bent at the same rate as mine.
>
>  cheersPhil

----- Fim da mensagem de David Adler via 928uk <928uk at lists.928.org.uk> -----