[928uk] had or needs engine mounts ?

[Paul R Smith]

The original mounts don't collapse, they sometimes tear though. Standard 
measurement is sump level with cross-member.

Smiffy

On 17/06/2024 08:02, kenworthy via 928uk wrote:
Is there a standard dimensional check for all models Phil or only the S4?
Mine are 45 yo but still look fine.
Duncan


On 2024-06-16 11:36, phil rick via 928uk wrote:
> most will know that original engine mountings collapse over time.
> have just fitted some of Rogers excellent versions to my S4, but a quick
> and easy check to see if yours need replacing or a seller says they have
> been fitted and you want to check they have.
> measure from the top of the P/S fuel rail cover to the bottom of the 
> strut
> brace as pictured below
> https://photobucket.com/u/phil928/a/b5ff2e9c-3a29-4cd6-9750-028f505097cc
> picture shows with the new mountings, should be around 25mm
> original sunk engine mounts measured 40mm at the same place.
> i know the cross brace can bend slightly over time but i guess most will
> have bent at the same rate as mine.
> cheers
> Phil