[928uk] Hot start valve

[steve monks]

Hi Ben, thanks for your response.
There is a jet in the end of the solenoid valve, wondered if it could be
removed for access to possible replacable seal? solenoid does click powered
up.
Cheers Steve

On Wed, 8 Jan 2025, 20:47 Ben Hodges, <benhodges1975 at gmail.com> wrote:

> Hi Steve
>
> You can run with it ‘deleted’ whilst you find a good used one Steve.
> Disconnect the electrical connector  on the valve and block the valve /
> return line (you’ll need to be creative here). You’ll have sluggish hot
> starts but better that than it messing with your control pressures all the
> time.
>
> Cheers
> Ben
>
> On Wed, 8 Jan 2025 at 19:20, steve monks via 928uk <928uk at lists.928.org.uk>
> wrote:
>
>> Porsche 928s 1982
>> Hi, the hot start valve is leaking back on the return pipe to fuel
>> distributor, I believe this part is nla, please can you advise on best
>> solution to this issue?
>> KR Steve
>>
>