[928uk] Hot start valve

[steve monks]

Will try blowing through, fit and test tomorrow.
Number 605 103 00

Cheers Steve

On Wed, 8 Jan 2025, 21:15 Paul R Smith via 928uk, <928uk at lists.928.org.uk>
wrote:

> Agreed. You might need lots of throttle for hot starts.
>
> I don't know what is inside, is it worthwhile blowing through it
> backwards whilst powered, in case something it stopping it closing
> properly.
>
> Also, I probably have a spare. Is there a bosch number on it? I think I
> know what one looks like, but it would be better to check numbers.
>
> Smiffy
>
> On 08/01/2025 20:46, Ben Hodges via 928uk wrote:
>
> Hi Steve
>
> You can run with it ‘deleted’ whilst you find a good used one Steve.
> Disconnect the electrical connector  on the valve and block the valve /
> return line (you’ll need to be creative here). You’ll have sluggish hot
> starts but better that than it messing with your control pressures all the
> time.
>
> Cheers
> Ben
>
> On Wed, 8 Jan 2025 at 19:20, steve monks via 928uk<928uk at lists.928.org.uk>
> wrote:
>
> > Porsche 928s 1982
> > Hi, the hot start valve is leaking back on the return pipe to fuel
> > distributor, I believe this part is nla, please can you advise on best
> > solution to this issue?
> > KR Steve
> >
>
>