[928uk] Hot start valve

[Ben Hodges]

I’ve not had one apart Steve so not sure if they’re repairable. Will also
check spares to see if I have one.

Cheers
Ben

On Wed, 8 Jan 2025 at 21:35, steve monks via 928uk <928uk at lists.928.org.uk>
wrote:

> Will try blowing through, fit and test tomorrow.
> Number 605 103 00
>
> Cheers Steve
>
> On Wed, 8 Jan 2025, 21:15 Paul R Smith via 928uk, <928uk at lists.928.org.uk>
> wrote:
>
> > Agreed. You might need lots of throttle for hot starts.
> >
> > I don't know what is inside, is it worthwhile blowing through it
> > backwards whilst powered, in case something it stopping it closing
> > properly.
> >
> > Also, I probably have a spare. Is there a bosch number on it? I think I
> > know what one looks like, but it would be better to check numbers.
> >
> > Smiffy
> >
> > On 08/01/2025 20:46, Ben Hodges via 928uk wrote:
> >
> > Hi Steve
> >
> > You can run with it ‘deleted’ whilst you find a good used one Steve.
> > Disconnect the electrical connector  on the valve and block the valve /
> > return line (you’ll need to be creative here). You’ll have sluggish hot
> > starts but better that than it messing with your control pressures all
> the
> > time.
> >
> > Cheers
> > Ben
> >
> > On Wed, 8 Jan 2025 at 19:20, steve monks via 928uk<
> 928uk at lists.928.org.uk>
> > wrote:
> >
> > > Porsche 928s 1982
> > > Hi, the hot start valve is leaking back on the return pipe to fuel
> > > distributor, I believe this part is nla, please can you advise on best
> > > solution to this issue?
> > > KR Steve
> > >
> >
> >
>