[928uk] battery box lid hinges

[phil rick]

yes could be riveted into position.

On Sun, Jan 12, 2025 at 7:31 PM <jonathanrackowe at gmail.com> wrote:

> Couldn't the hinges be riveted into position? Or must they be welded?
>
> Best regards,
> Jonathan
>
> 1991 928 GT Amethyst Metallic
>
>
> -----Original Message-----
> From: 928uk <928uk-bounces at lists.928.org.uk> On Behalf Of phil rick via
> 928uk
> Sent: 12 January 2025 19:15
> Cc: 928uk at lists.928.org.uk
> Subject: Re: [928uk] battery box lid hinges
>
> thanks Gents, i managed to drill out the spot welds on the hinges from this
> red S4, i just did not know if they were prone for it.
> so have a good lid with good hinges in guards red if anybody wants it
> before i stick it on ebay, but will need welding into position.
> cheers
> Phil
>
>
> On Sun, Jan 12, 2025 at 5:36 PM Simon Crowe via 928uk <
> 928uk at lists.928.org.uk> wrote:
>
> > The hinges on mine are fine but for some reason the pins are missing. The
> > spacesaver does a good job at keeping the lid in place!
> >
> > > On 12 Jan 2025, at 17:16, Paul R Smith via 928uk <
> 928uk at lists.928.org.uk>
> > wrote:
> > >
> > > I had one once a long time ago, can't remember which car it was, where
> > the pins of the hinges rusted then broke. I knocked out the remains of
> the
> > pins and replaced with (probably) a bit of welding filler rod.
> > >
> > > Smiffy
> > >
> > > On 12/01/2025 17:08, phil rick via 928uk wrote:
> > >
> > > are there many out there with broken hinges on the battery box lid ?
> > > cheers
> > > Phil
> > >
> > >
> >
> >
>
>