[928uk] front upper control arm ball joint nut

[Ben Hodges]

This!

On Thu, 16 Jan 2025 at 20:46, Howard Miller via 928uk <
928uk at lists.928.org.uk> wrote:

> Put a big lever over the upper arm (hooked under the mounts at the inner
> wing) and push the arm down hard. It normally adds enough resistance to get
> the nut done up.
>
> Howard
>
> On Thu, 16 Jan 2025 at 19:06, David Adler via 928uk <
> 928uk at lists.928.org.uk>
> wrote:
>
> > Hi
> >
> > I have just replaced my front shock etc and decided to undo the front
> > upper control arm ball joint nut to give me more space. It's now time to
> > put it back and despite jacking up the lower control arm to raise the
> > suspension, the whole upper ball joint spins when I turn the nut. Am I
> > doing something stupid?
> >
> > TIA
> >
> > David 1984 S2 manual.
> >
>