[928uk] Clutch master cylinder

[Ben Hodges]

I missed that there was a rebuild kit for the master so I will try that
route first.

Regards
Ben

On Mon, 20 Jan 2025 at 00:04, Jonathan Rackowe <jonathanrackowe at gmail.com>
wrote:

> Hi Ben,
>
> Had you already considered new seals?
>
> Why do you need to replace the m/c?
>
> I would consider a sleeved rhd one nearer to stock than a lhd one with
> weird hose routing and lengths.
>
> If you do replace your m/c please sell one of us the old one to
> recondition.
>
> Have you tried Douglas Valley Breakers for a rhd m/c ?
>
> Best regards,
> Jonathan
>
> 1991 928 GT Amethyst Metallic
>
>
> On Sun, 19 Jan 2025, 11:10 pm Ben Hodges via 928uk, <
> 928uk at lists.928.org.uk> wrote:
>
>> Thanks Mike
>>
>> I’m converting my auto to a manual so want to keep things stock for now to
>> minimise the variables!
>>
>> Discussing it with a mate earlier he remembered when he put a new one into
>> his GT it came with two rods - one being longer than the other. I’m going
>> to purchase the 928.xx LHD one and swap the rods over if it is a different
>> length.
>>
>> Cheers
>> Ben
>>
>> On Sun, 19 Jan 2025 at 20:50, Mike Miller <auskartdyno at gmail.com> wrote:
>>
>> > I had mine stainless steel sleeved and reduces 1 size in diameter to
>> give
>> > quicker clutch action. Little adjustment on the assist spearing and
>> pedal
>> > effort quite acceptable even for an octanagerian.
>> > Mike Miller Brisbane 82s 5 sod
>> >
>>
>