[928uk] 1984 TDC question
Ben Hodges
benhodges1975 at gmail.com
Wed Mar 12 07:28:43 UTC 2025
Oops! Easy enough to do i suppose, lucky it didn’t end in disaster when the
belt was refitted.
Cheers
Ben
On Tue, 11 Mar 2025 at 20:17, Todd Oxfordeye (eUk) <todd at oxfordeye.co.uk>
wrote:
> It’s looking like the balancer is indeed on backwards….
>
>
> On 11 Mar 2025, at 07:26, Ben Hodges <benhodges1975 at gmail.com> wrote:
>
>
> Yeah must be that Todd - let me know how you solve the mystery chaps
>
> On Tue, 11 Mar 2025 at 00:12, <todd at oxfordeye.co.uk> wrote:
>
>> Yeah, it reads correctly.
>>
>>
>>
>> With cylinder1 at the top both cam pulleys line up correctly. We suspect
>> someone’s taken the woodruff key out and the balancer is just “on” at any
>> old angle.
>>
>>
>>
>> Ok, so we will lock the engine (with the tool) at Cylinder 1 “top” and
>> see what’s up with the balancer….
>>
>>
>>
>> Thanks!
>>
>>
>>
>> Todd.
>>
>>
>>
>> *From:* Ben Hodges <benhodges1975 at gmail.com>
>> *Sent:* 10 March 2025 19:57
>> *To:* Todd Oxfordeye (eUk) <todd at oxfordeye.co.uk>
>> *Cc:* Todd Oxfordeye via 928uk <928uk at lists.928.org.uk>;
>> Richard.swithernbank at gmail.com
>> *Subject:* Re: [928uk] 1984 TDC question
>>
>>
>>
>> Weird - is the harmonic balancer on the right way around? Marking should
>> read the right way with you facing the engine.
>>
>>
>>
>> Assuming it is…
>>
>> I would rotate the engine into cylinder 1 is at the top, then check if
>> the cams both line up. If they don’t rotate engine again until cylinder 1
>> lines up again and check if can align - which they should. Mark the
>> balancer as 0T here. Repeat to check things again.
>>
>>
>>
>> Cheers
>>
>> Ben
>>
>>
>>
>> On Mon, 10 Mar 2025 at 18:45, Todd Oxfordeye (eUk) via 928uk <
>> 928uk at lists.928.org.uk> wrote:
>>
>> Hi guys
>>
>> I’ve got a friend that is trying to do his cambelt on a 1984 car.
>>
>> He cannot work out the harmonic balancer/cam pulley positions or markers
>> to find TDC.
>>
>> I spent about 1 hour on a video call trying to help him but the 1984
>> engine is clearly different to my 79 and 90 engines.
>>
>> If he puts the harmonic balancer at 0|T the marking for the two cam
>> pulleys is nowhere near. We tried rotating 180 deg and still nothing lines
>> up.
>>
>> We tried rotating the engine until piston 1 is at the top. Harmonic
>> balancer 0|T is nowhere near (tried 180 deg and same story).
>>
>> We tried lining up the cam pulley positions ”notches” with the lines on
>> the backing plate (the two cam pulleys line up together) but the harmonic
>> balancer is a mile off.
>>
>> So what are we doing wrong? Is there a trick I’m missing? (There is also
>> no 45 deg marking on the balancer)
>>
>> Thanks for any help
>> Todd
>>
>>
More information about the 928uk
mailing list